Flow Pro User Manual
Firmware updates will be regularly available for Flow Pro to ensure it runs efficiently. Please
update to the latest version for optimal results.
1. Connect Flow Pro to the Insta360 app. The app will prompt you to update the firmware if a new
version is available. Please follow the on-screen prompts to update Flow Pro's firmware.
2. If the app does not send a prompt, open the Insta360 app, go to Settings, "Firmware Version,"
and check for a new version.
3. Once the update is complete, Flow Pro will automatically reconnect to the app. You can check if
the firmware version is correct by opening the Insta360 app, going to the shooting page and
tapping General Settings to view Flow Pro's current firmware version, or going to Settings and
checking it in "Firmware Version".
To Next Page
Loading...