Insta360 Flow Pro - Indicator Lights

Flow Pro User Manual
27
Indicator Lights
Status
Indicator Light Status
Power on
Gimbal Mode Indicator Lights light up one by one from left to right
Power off
Gimbal Mode Indicator Lights light up at the same time and then
go out one by one from right to left
Pairing
NFC Pairing LED: Slowing flashing
Pairing success
NFC Pairing LED: Solid
Pairing failure
NFC Pairing LED: Slowing flashing, return to pairing status
Tracking started
Tracking Ring Light: Solid
Tracking stopped
Tracking Ring Light: No light
Tracking
Tracking Ring Light: Slowing flashing
Tracking failed
Tracking Ring Light: Solid
Charging
The Gimbal Mode Indicator Lights will display the charging status
light. If you switch the shooting mode, the lights will display the
selected mode for 3 seconds and then return to indicate charging.
The Gimbal Mode Indicator Lights display the charging status light
when the gimbal is charging. You can press the power button to
check the battery level, which will be displayed for 3 seconds, and
then the indicator lights will return to indicate charging.