Insta360 Flow Pro - Unfolding and Folding

Flow Pro User Manual
3
Unfolding and Folding
Install Your Phone
1. Following the direction indicated by the icon on the right side of the Magnetic Phone Clamp,
stretch the Magnetic Phone Clamp around the middle of your phone.
2. Align and attach the magnetic notch on the back of the Magnetic Phone Clamp to the raised
bump on the gimbal's magnetic surface.
3. Hold the transparent battery shell and pull the handle downwards in the direction indicated by
the arrow to unfold it. The gimbal will automatically power on, and the indicator lights will turn on.
Notes:
• Ensure the direction of your phone's camera is the same as the direction marked on the
Magnetic Phone Clamp.
• Position the Magnetic Phone Clamp in the middle of your phone so that both sides stretch the
same distance and fit around the phone.
• Attach your phone to the Magnetic Phone Clamp first, then attach and unfold Flow Pro.
• Each time Flow Pro is powered on, it automatically detects if a phone is mounted within 30
seconds. If no phone is detected, it automatically enters standby mode.