Flow Pro User Manual
using the Joystick while tracking.
9. Flow Pro Battery Level: Displays Flow Pro's current battery level.
9. Phone Battery Level: Displays the phone's current battery level.
10. Resolution and Frame Rate: Set resolution and video frame rate.
11. Phone Camera Settings: Adjust settings such as shutter speed, ISO, EV, and WB.
12. Flow Pro Settings: Tap to display the gimbal mode and related settings.
￮ Gimbal Mode: Select from Auto, F, PF and FPV.
￮ Mode Change Method: Choose between two options for how to switch gimbal modes
and shooting modes.
￮ Follow Speed: Controls how fast the gimbal reacts to movement. Set to fast, medium or
slow.
￮ Joystick Speed: Set to fast, medium or slow.
￮ Zoom Speed: Set to fast, medium or slow.
￮ Tracking Sensitivity: Set to Normal or Sensitive. Adjust the framing of the target.
￮ Horse Tracking: Turn on/off. Once turned on, press the trigger button or manually draw a
box around the horse you wish to track. Flow Pro will turn on horse tracking as a priority.
￮ Front Cam Auto Tracking: When turned on, Flow Pro will track subjects using the front
camera instead of the rear camera.
￮ Always-On Tracking: When turned on, Flow Pro keeps tracking the subject (people only)
until they reappear in the shot.
￮ Reverse Joystick Horizontally: Turn on to reverse the direction of the pan axis movement
when using the Joystick.
￮ Reverse Joystick Vertically: Toggle on to reverse the direction of the tilt axis movement
when using the Joystick.
￮
Flow Pro Sound and Vibration: Turn Flow Pro's sound and vibration on or off (the
Bluetooth reset tone cannot be turned off).
￮ Tracking Ring Light: Turn on/off. When it is turned on, adjust the brightness to low,
medium or high.
￮ Auto Calibration: If the phone alignment seems off and you've attached your phone
correctly, try auto calibration to correct the position. Follow the on-screen prompts to
complete the process. Do not touch Flow Pro during calibration.
To Next Page
Loading...