Insta360 Titan User Manual

5. Turn on the receiver , and connect the phone / iPad to the receiver through USB cable . Take iOS as an example . Wait
about 15 seconds or so , the phone / iPad settings ( generally in the system settings menu ) will show " Ethernet "
option , click to enter the interface of Ethernet settings . Set " conFig . IP " to automatic , and confirm whether the IP
address is also 192.168.100. XXX . In most Android devices , there is no " Ethernet " option . The set - up is ready a  er
connecting your devices to the receiver via USB cable . ( please refer to the Compatibility List below for the supported
Android devices )
If there is no required IP available a  er waiting for a while , replug the USB cable and reconnect until the desired IP
address is displayed .
If you want to connect the receiver to your computer , please use a network cable to connect . A  er connecting , set the
computer network to DHCP , which can automatically obtain the IP address assigned by the receiver .

Insta360 Titan Specifications

General

Brand	Insta360
Model	Titan
Category	Action Cameras
Language	English