1.
Enter the settings menu of Titan
,
set Ethernet to DHCP mode
.
2.
Connect Titan and a computer to a router through LAN cable
.
Set the router
'
s allocation mode to DHCP
.
3.
Make sure the camera and computer are inside the same LAN
,
open the controlling client so
ware on the computer
,
and input the IP address displayed on top of the camera screen
.
Wired connection
--
Direct connection mode
1.
Enter the camera settings menu of Titan
,
set Ethernet to Direct mode
.
2.
Connect Titan to a computer with LAN cable
.
If there is no LAN port on your computer
,
please use the USB ethernet
network adapter to connect
.
In this mode
,
the IP address of Titan is fixed as
192.168.1.188,
which requires to set up
static IP for the PC network segment of
192.168.1.
And it is recommended to set as
192.168.1.100,
with the subnet
mask of
255.255.255.0.
To Next Page
Loading...
