7.5
Error message summary
7.5.1
Common error codes
Error Code Meaning Solution
310
SD card not inserted Check if all the SD cards are usable and inserted in the camera
.
311
No enough storage space in SD
card
Find out the problematic SD card based on the card number
shown on the camera screen
.
Clean its files or change other SD
card
.
312
SD card is write
-
protected or
removed when recording video
If the SD card has been corrupted
,
please try formatting to exFat
again
.
313
SD card
'
s write speed doesn
'
t
meet requirements due to the
accumulation of file fragments
.
Please use computer to format the SD card again
.
413
The operation was not allowed
under this situation
Press any button to eliminate this error
;
if it doesn
'
t help
,
please
restart the camera
.
414
Microphone error
If you are using external microphone
,
please unplug it and plug
in again
;
then start to shoot
.
415
Optical flow stitching error Please try shooting again
.
417
The temperature of camera is
too high
Wait and retry
.
418
Module is busy Try again
.
430
File open error Check if the SD card was write
-
protected
.
431
File io error Check if the SD card was write
-
protected
.
432
No enough storage space Check the storage space of device
.
433
No storage device Connect storage device
.
434
Low writing speed of storage
device
Format the storage device to see whether it helps
;
if doesn
'
t
,
please change the storage device
.
435
MUX write error Restart the camera
.
436
MUX open error Restart the camera
.
437
Network reconnecting Wait
.
438
Network fails to reconnect Check the network
.
439
Network disconnected Check the network
.
450
System goes stuck Restart the camera
.
460
Failed to open lens module
1.
Turn o
ff
the camera
,
take out the battery and leave it for about
5
mins
;
then restart the camera
.
2.
If you are using H
2
N or other similar external audio devices
,
please be sure to follow the order
:
unplug H
2
N
,
start and set
H
2
N
;
a
er these steps
,
you can connect it with Titan
.