Instant Pot Smart-60 User Manual

7

Before the rst use, please take out all accessories from the package and read this manual
carefully. Please pay parcular aenon to operaonal instrucons and cauons to avoid any
injury or property damage. Please wash the inside of the lid and the inner pot with warm soapy
water, rinse and dry thoroughly. Wipe the outer housing with a clean damp cloth. Never immerse
the cooker housing in water or any other liquid. The inner pot, sealing ring and steam release
handle and all accessories are dishwasher safe. But never clean the lid and housing in a
dishwasher.
Installing the Condensaon Collector
To install the condensaon collector, slide
it into the slot on the cooker housing.
Follow the reverse order to remove it for
cleaning.
Removing and Installing the An-Block Shield
When necessary, the an-block
shield can be removed by
pushing it on the side to li it up.
To install the an-block shield,
posion it in place and press it
down. The an-block shield can
be installed on either direcon
lengthwise.
Removing and Installing the Sealing Ring
When necessary, the sealing ring can be
removed by pulling upwards from the
sealing ring rack in secons. To reinstall the
sealing ring, pressing it down into the rack
secon by secon. The sealing ring can be
installed on either side facing up.
Please note the following:
 Prior to each use, inspect to make sure the sealing ring is well seated in the sealing ring
rack and the an-block shield is mounted properly on the steam release pipe. A properly
seated sealing ring can be shied, with a bit of eort, clockwise or an-clockwise inside
the sealing ring rack.
 Aer use, remove any foreign objects from the sealing ring and an-block shield.
 Keep the sealing ring clean to avoid odor. Washing the sealing ring in warm soapy water or
dishwasher can remove odor. However, it is normal for the sealing ring to absorb the smell
of certain acidic foods. That's why it is always a good idea to have more than one sealing
ring on hand. You can purchase addional sealing rings from www.InstantPot.com.
 Never pull the sealing ring by force, as the pulling may cause deformaon and aect its
funcon in sealing the pressure.
 A sealing ring with cracks, cuts or other damages should not be used. A new sealing ring
replacement should be used. To avoid leakage, please choose authenc parts from Instant
Pot Company.

Instant Pot Smart-60 Specifications

General

Brand	Instant Pot
Model	Smart-60
Category	Cooker
Language	English