Instant Pot DUO NOVA 60

Questions and Answers

S
Stephanie OwensAug 12, 2025
What to do if I have difficulty opening the Instant Pot Electric Pressure Cooker lid?
- Z
  Zachary MaxwellAug 12, 2025
  If you're having difficulty opening the Instant Pot Electric Pressure Cooker lid, it could be due to pressure inside the cooker. Make sure to release the pressure according to the recipe. Only attempt to open the lid after the float valve has dropped down. Another reason could be that the float valve is stuck because of food debris or residue. In this case, fully release the pressure, then gently press the float valve with a long utensil. Open the lid cautiously and thoroughly clean the float valve, surrounding area, and lid before the next use.
C
Chelsey MorganAug 16, 2025
Why is steam leaking from the side of my Instant Pot Electric Pressure Cooker lid?
- M
  Mr. John PerryAug 16, 2025
  If steam is leaking from the side of the Instant Pot Electric Pressure Cooker lid, it could be due to several reasons. The sealing ring might be damaged or not installed properly, so try replacing it. Alternatively, the lid may not be closed correctly; try opening and closing it again. The sealing ring rack could also be warped or off-center; in this case, remove the sealing ring and check the rack for any bends or warps. Also, check the sealing ring for any food debris and clean it thoroughly.
S
suemarshallAug 20, 2025
Why doesn't the float valve rise on my Instant Pot DUO NOVA 60?
- L
  Lindsay BenderAug 20, 2025
  If the Instant Pot Electric Pressure Cooker float valve does not rise, it could be due to a few reasons. Food debris may be present on the float valve or its silicone cap; remove the float valve from the lid and clean it thoroughly. Also, ensure there is enough liquid in the inner pot; check for scorching and add 1 1/2 cups (12 oz / 325 mL) of liquid if needed. Another possibility is that the float valve silicone cap is worn, damaged, or missing, so install or replace the float valve.
M
Maria SanchezAug 25, 2025
Why does steam gush from the steam release handle of my Instant Pot DUO NOVA 60 when in the 'Sealing' position?
- D
  David PorterAug 25, 2025
  If steam gushes from the steam release handle when in the "Sealing" position on your Instant Pot Electric Pressure Cooker, it could be due to not enough liquid in the inner pot. Try adding 1 1/2 cups (12 oz / 325 mL) of a thin cooking liquid to the inner pot. Also, ensure the steam release handle is properly seated by turning it to the "Sealing" position.
Z
zfisherAug 27, 2025
What to do if the display remains blank on my Instant Pot DUO NOVA 60 Electric Pressure Cooker?
- M
  Mary HopkinsAug 28, 2025
  If the display remains blank after connecting the power cord to your Instant Pot Electric Pressure Cooker, inspect the power cord and ensure it is plugged tightly into the base power socket. Also, check the outlet to ensure it is powered.
T
Timothy NortonAug 31, 2025
Why is there minor steam leaking from the steam release handle of my Instant Pot Electric Pressure Cooker?
- K
  kellybaileyAug 31, 2025
  If you notice minor steam leaking or hissing from the steam release handle during the cook cycle of your Instant Pot Electric Pressure Cooker, ensure the steam release handle is in the "Sealing" position. Also, the cooker might be regulating excess pressure, which is normal and requires no action.
L
Laura JensenSep 3, 2025
What to do if the inner pot is stuck to the lid of my Instant Pot Electric Pressure Cooker?
- D
  Dennis BakerSep 3, 2025
  If the inner pot is stuck to the lid when you open your Instant Pot Electric Pressure Cooker, it's likely due to the cooling of the inner pot creating suction. To release the vacuum, turn the steam release handle towards the "Venting" position.
C
Christopher ElliottSep 8, 2025
Why does my Instant Pot DUO NOVA 60 Electric Pressure Cooker make a clicking sound?
- R
  Roberta MossSep 8, 2025
  The occasional clicking or light cracking sound from your Instant Pot Electric Pressure Cooker could be the normal sound of power switching and the expanding pressure board when temperatures change. Alternatively, it could be due to the bottom of the inner pot being wet; wipe the bottom of the inner pot and ensure the heating element is dry before cooking.