What to do if my Instant Pot Kitchen Appliances smells and smokes on initial use?
Don't worry, this is normal and harmless. The smell and smoke are caused by the heating of a protective substance applied to the heating element during manufacturing. It usually occurs only on the first use, so no action is required.
Why does steam leak from the float valve of my Instant Pot duo plus Electric Pressure Cooker?
If steam leaks from the float valve for over 2 minutes on your Instant Pot Electric Pressure Cooker: * There may be food debris on the float valve silicone seal. Clean the float valve silicone seal. * The float valve silicone ring may be worn out. Replace the float valve silicone ring.
What to do if my Instant Pot duo plus Electric Pressure Cooker flashes 'Lid'?
If your Instant Pot Electric Pressure Cooker display flashes “Lid”, it means the lid is not in the correct position for the selected program. Close the lid for pressure cooking or open the lid for sautéing.
Why does steam gush from the Instant Pot Electric Pressure Cooker when sealed?
If steam gushes from the steam release valve when the quick release button is in the “Seal” position, it could be due to not enough liquid in the inner pot. Add thin, water-based liquid to the inner pot according to its size: 3 L - 250 ml / 5.7 L - 375 ml / 8 L - 500 ml. It may also be caused by a steam release valve that is not seated properly, make sure that the quick release button is in the “Seal” position. In some cases, this can indicate a pressure sensor control failure. Contact Customer Care in this case.
What to do if I have difficulty opening the Instant Pot Electric Pressure Cooker lid?
If you are having difficulty opening the lid of your Instant Pot Electric Pressure Cooker, it may be because there is still pressure inside the cooker. Release the pressure according to the recipe. Only open the lid after the float valve has dropped down. Another cause may be that the float valve is stuck in the popped-up position due to food debris or residue. Ensure steam is completely released by quick-releasing pressure, then press float valve gently with a long utensil. Open lid carefully and thoroughly clean float valve, surrounding area and lid before next use.
How to fix difficulty closing the Instant Pot duo plus lid?
If you're having difficulty closing the lid of your Instant Pot Electric Pressure Cooker, first check that the sealing ring is correctly positioned, ensuring it is snug behind the sealing ring rack. If that's not the issue, the float valve might be in the popped-up position; gently press it down with a long utensil. If the contents in the cooker are still hot, press the quick release button down until it clicks into “Vent” position, then lower lid onto cooker base slowly, allowing heat to dissipate.
What to do if the Instant Pot duo plus Electric Pressure Cooker inner pot is stuck to the lid?
If the inner pot is stuck to the lid when you open your Instant Pot Electric Pressure Cooker, it is likely due to the cooling of the inner pot creating suction, causing it to adhere to the lid. To release the vacuum, press the quick release button down until it clicks into the “Vent” position.
Why is steam leaking from the side of my Instant Pot Electric Pressure Cooker lid?
If steam leaks from the side of the Instant Pot Electric Pressure Cooker lid, ensure that the sealing ring is fitted correctly, or replace it if damaged. Also, remove the sealing ring and clean it thoroughly to eliminate any food debris. Make sure that the lid is closed properly. In some cases, the sealing ring rack may be warped or off-centre, or the inner pot rim may be misshapen, or there may be food debris on float valve or float valve silicone cap, or the float valve silicone cap may be damaged or missing, or the float valve may be obstructed by the lid-locking mechanism, or there may be no heat in the inner pot. Contact Customer Care in these cases. If there is not enough liquid in the inner pot, check for scorching on the bottom of inner pot. Add thin, water-based liquid to the inne...
Why am I unable to change the program on my Instant Pot Kitchen Appliances when a cooking program is in progress?
Once a cooking program has started on your Instant Pot Kitchen Appliances, you cannot switch to another cooking program. To select a new program, press the “Cancel” key to stop the current cooking program.
Why does my Instant Pot duo plus beep and display a code?
If all LCDs flash with a code appearing on screen and the warning beep is ON, it could be due to: * A faulty temperature sensor. In this case, contact support online. * The inner pot not being placed into the cooker base properly. Insert the inner pot properly. * There being no water in the inner pot. Put food and water in the inner pot. * A faulty pressure sensor. In this case, contact support online. * A faulty HIGH pressure sensor. * A faulty LOW pressure sensor.
General| Material | Stainless Steel (inner pot) |
|---|---|
| Power | 1000 Watts |
| Pressure Settings | High and Low |
| Voltage | 120V |
| Capacity | 6 quarts |
| Functions | Pressure Cook, Slow Cook, Rice Cooker, Steamer, Sauté, Yogurt Maker, Warmer |
| Display | LCD |
| Safety Features | Overheat Protection, Safety Lock |
| Preset Programs | 15 |
| Dimensions | 13.38 x 12.2 x 12.48 inches |
| Weight | 11.83 lbs |
| Warranty | 1 year limited |
To Next Page