What to do if my Instant Pot duo plus Electric Pressure Cooker flashes 'Lid'?
If your Instant Pot Electric Pressure Cooker display flashes “Lid”, it means the lid is not in the correct position for the selected program. Close the lid for pressure cooking or open the lid for sautéing.
Why is my Instant Pot Electric Pressure Cooker rice half cooked?
If your rice is half cooked or too hard in your Instant Pot Electric Pressure Cooker: * Adjust the dry rice and water ratio according to the recipe; there may be too little water. * After the cooking cycle completes, leave the lid on for 5 more minutes; the lid may have been opened too early.
Why is my Instant Pot Electric Pressure Cooker display blank?
If the display of your Instant Pot Electric Pressure Cooker remains blank after connecting the power cord: * Inspect the power cord to ensure a good connection and check if the power outlet is active. There may be a bad power connection or no power. * The cooker’s electrical fuse may have blown. In this case, contact support online.
What to do if my Instant Pot Electric Pressure Cooker lid is hard to open?
If you're having trouble opening the lid of your Instant Pot Electric Pressure Cooker: * There may be pressure inside the cooker. Position the steam release valve to the venting position to reduce the internal pressure. Open the lid after the pressure is completely released. * The float valve might be stuck in the popped-up position. Press the float valve lightly with a pen or long utensil.
Why does steam leak from the side of my Instant Pot duo plus Electric Pressure Cooker lid?
Steam may leak from the side of the lid for several reasons: * The sealing ring might not be installed. Install the sealing ring. * The sealing ring may be damaged and needs replacing. * There might be food debris attached to the sealing ring, so clean it. * The lid may not be closed properly; try opening and closing it again.
Why is the display blank on my Instant Pot duo plus?
If the display remains blank after connecting the power lead to your Instant Pot Electric Pressure Cooker, inspect the power lead for damage. If damage is noticed, contact Customer Care. Also, check the outlet to ensure it is powered.
What to do if the Instant Pot duo plus Electric Pressure Cooker inner pot is stuck to the lid?
If the inner pot is stuck to the lid when you open your Instant Pot Electric Pressure Cooker, it is likely due to the cooling of the inner pot creating suction, causing it to adhere to the lid. To release the vacuum, press the quick release button down until it clicks into the “Vent” position.
How to fix difficulty closing the Instant Pot duo plus lid?
If you're having difficulty closing the lid of your Instant Pot Electric Pressure Cooker, first check that the sealing ring is correctly positioned, ensuring it is snug behind the sealing ring rack. If that's not the issue, the float valve might be in the popped-up position; gently press it down with a long utensil. If the contents in the cooker are still hot, press the quick release button down until it clicks into “Vent” position, then lower lid onto cooker base slowly, allowing heat to dissipate.
What to do if I have difficulty opening the Instant Pot Electric Pressure Cooker lid?
If you are having difficulty opening the lid of your Instant Pot Electric Pressure Cooker, it may be because there is still pressure inside the cooker. Release the pressure according to the recipe. Only open the lid after the float valve has dropped down. Another cause may be that the float valve is stuck in the popped-up position due to food debris or residue. Ensure steam is completely released by quick-releasing pressure, then press float valve gently with a long utensil. Open lid carefully and thoroughly clean float valve, surrounding area and lid before next use.
Why does steam gush from the Instant Pot Electric Pressure Cooker when sealed?
If steam gushes from the steam release valve when the quick release button is in the “Seal” position, it could be due to not enough liquid in the inner pot. Add thin, water-based liquid to the inner pot according to its size: 3 L - 250 ml / 5.7 L - 375 ml / 8 L - 500 ml. It may also be caused by a steam release valve that is not seated properly, make sure that the quick release button is in the “Seal” position. In some cases, this can indicate a pressure sensor control failure. Contact Customer Care in this case.
General| Material | Stainless Steel (inner pot) |
|---|---|
| Power | 1000 Watts |
| Pressure Settings | High and Low |
| Voltage | 120V |
| Capacity | 6 quarts |
| Functions | Pressure Cook, Slow Cook, Rice Cooker, Steamer, Sauté, Yogurt Maker, Warmer |
| Display | LCD |
| Safety Features | Overheat Protection, Safety Lock |
| Preset Programs | 15 |
| Dimensions | 13.38 x 12.2 x 12.48 inches |
| Weight | 11.83 lbs |
| Warranty | 1 year limited |
To Next Page