Why is there steam leaking from the steam release valve on my Instant Pot Electric Pressure Cooker?
If you notice a small amount of steam leaking or hissing from the steam release valve during the cook cycle of your Instant Pot Electric Pressure Cooker, ensure the quick release button is in the “Seal” position. This may be normal, as the cooker regulates excess pressure.
Why is white smoke coming from my Instant Pot Fryer Lid?
If white smoke is coming from your Instant Pot Fryer Lid, it may be due to cooking foods with a high fat content. Try to avoid air frying foods that contain a lot of fat. Alternatively, the food may be too moist. Pat dry moist food ingredients before air frying. Also, be mindful when seasoning food. Spray vegetables and meats before adding seasoning so they adhere to the ingredients.
What to do if black smoke is coming from my Instant Pot Air Fryer Lid?
If you notice black smoke coming from the Air Fryer Lid of your Instant Pot, it could be due to using an oil with a low smoke point, or food residue on the bottom of the inner pot or around the element on the Air Fryer Lid. If it is due to food residue, cancel the Smart Program, unplug the cooker, and allow it to cool to room temperature. Remove all accessories from the inner pot and clean the inner pot, Air Fryer Lid, and all accessories thoroughly. Could be an equipment malfunction, in which case you should contact Customer Care.
What to do if the display remains blank on my Instant Pot?
If the display remains blank after connecting the power cord to your Instant Pot, inspect the power cord for damage and ensure the outlet is powered. If damage is noticed, or the outlet is not powered, contact Customer Care. If the cooker’s electrical fuse has blown, or there is no heat in the inner pot, contact Customer Care. Also, if the inner pot base may be damaged, contact Customer Care.
What to do if I have difficulty opening the lid on my Instant Pot DUO CRISP Electric Pressure Cooker?
If you're having trouble opening the lid of your Instant Pot Electric Pressure Cooker, it's likely due to pressure inside the multicooker. Release the pressure according to your recipe. Only attempt to open the lid after the display indicates it is safe to do so, showing 'OK to open lid'.
Why is steam gushing from the steam release valve of my Instant Pot DUO CRISP Electric Pressure Cooker when sealed?
If you notice steam gushing from the steam release valve when the quick release button is in the “Seal” position on your Instant Pot Electric Pressure Cooker, flick the quick release button to ensure it is in the “Seal” position.
Why doesn't the float valve rise on my Instant Pot DUO CRISP?
If the float valve of your Instant Pot Electric Pressure Cooker does not rise, it may be due to food debris on the float valve or float valve silicone cap. Remove the float valve from the lid and clean it thoroughly. Also, check for scorching on the bottom of the inner pot and add 375 ml of a thin cooking liquid to the inner pot if there is too little liquid. Ensure that the float valve silicone cap is not damaged or missing; fit or replace the float valve if necessary.
Why is the inner pot stuck to the lid of my Instant Pot DUO CRISP?
If the inner pot is stuck to the pressure cooking lid when you open your Instant Pot Electric Pressure Cooker, it's likely due to the cooling of the inner pot creating suction. To release the vacuum, press the quick release button down until it clicks into the “Vent” position.
Why does my Instant Pot DUO CRISP Electric Pressure Cooker make clicking sounds?
Occasional clicking or light cracking sounds from your Instant Pot Electric Pressure Cooker can be normal. It can be the sound of power switching and the pressure board expanding when temperatures change, which requires no action. Another reason could be that the bottom of the inner pot is wet. Wipe the exterior surfaces of the inner pot and ensure the heating element is dry before inserting the inner pot into the multicooker base.
Why does the display remain blank on my Instant Pot DUO CRISP Electric Pressure Cooker?
If your Instant Pot Electric Pressure Cooker's display remains blank after connecting the power cord, first inspect the power cord for any damage. If you notice damage, contact Consumer Care. Then, check the outlet to ensure it is powered. It's also possible that the multicooker’s electrical fuse has blown, in which case you should contact Consumer Care.
General| Model | DUO CRISP |
|---|---|
| Category | Electric Pressure Cooker |
| Capacity | 8 Quarts |
| Power | 1500 Watts |
| Control Type | Digital |
| Pressure Levels | High and Low |
| Voltage | 120V |
| Functions | Pressure Cook, Slow Cook, Sauté, Steam, Bake, Roast, Air Fry, Dehydrate, Keep Warm |
| Material | Stainless Steel |
| Safety Features | Overheat Protection, Safety Lid Lock |
Essential safety precautions and warnings for using the appliance.
Steps for cleaning the appliance and its parts before the first use.
How to use pressure cooking and steam functions, including liquid requirements.
Instructions for using the Air Fry function for crisping food.
Solutions for common problems like display errors, leaks, and lid issues.
Explanations and solutions for specific error codes displayed on the control panel.
To Next Page
