4
Get Started
5
Get Started
Getting started
Once the Vortex Plus is plugged in, the Control Panel will light up. After
a second, the display will show Off. After another second, the unit will
enter Standby mode.
If your Instant Vortex Plus is left inactive for over 2 minutes, the
display will dim.
Turning sound On/Off
When in Standby mode, press and hold Time and Temp
for 5 seconds until the display shows S OFF or S ON.
Audible safety alerts (beeps) cannot be turned off.
Choosing temperature unit
Choose which cooking temperature unit you would like to use,
Fahrenheit or Celsius.
• While in Standby mode, press and hold Temp for 5 seconds,
until display shows either Unit F or Unit C.
Save custom settings
You can set and save custom Time and Temperature settings for
Smart Programs.
Time
1. Select the Smart Program you want to change.
2. Press Time button and use the Control Dial to change
the temperature.
3. Press Start to save your changes.
Vortex Plus 4QT Stainless Steel_R6.indd 4Vortex Plus 4QT Stainless Steel_R6.indd 4 2021-06-25 3:49:39 PM2021-06-25 3:49:39 PM
To Next Page
Loading...
Need help?
General
