5
Get Started
Temperature
1. Select the Smart Program you want to change.
2. Press Temperature button and use the Control Dial to change
the temperature.
3. Press Start to save your changes.
The next time you use that Smart Programs the new temperature or time is
used. Adjustments made after cooking begins are not saved.
Reset Smart Programs to original settings
Reset individual Smart Programs
• With the cooker in Standby mode, press and hold one
Smart Program button for 5 seconds.
The Smart Program’s cooking time and temperature are restored
to the factory default setting.
Reset all Smart Programs
• With the cooker in Standby mode, press and hold the
Control Dial until the cooker beeps.
All Smart Program cooking times and temperatures are restored
to the factory default setting.
Cancel active cooking program
You can cancel any cooking program at any time.
• While in Standby, Preheating or active cooking program, press
Cancel. Depending on the temperature of the unit, the internal fan
may keep running to cool the unit.
Vortex Plus 4QT Stainless Steel_R6.indd 5Vortex Plus 4QT Stainless Steel_R6.indd 5 2021-06-25 3:49:39 PM2021-06-25 3:49:39 PM
To Next Page
Loading...
Need help?
General
