6
Get Started
7
Get Started
Initial set up
Unpack
1. Remove your new Vortex Plus from the box.
2. Remove all the packaging material from in and around the
air fryer.
3. Make sure to remove all the accessories from inside the cooking
chamber.
4. Don’t remove the safety warning stickers or the rating label from
the air fryer.
Clean before use
1. Wipe the interior with a damp cloth. Use a clean, soft cloth
to dry.
2. Wash the accessories with hot water and dish soap. Rinse
with warm, clear water and use a soft cloth to dry.
Placement
1. Place your Vortex Plus on a stable, level surface, away from
combustible material and external heat sources. Do not place your
Vortex Plus on top of another appliance.
2. Make sure to leave at least 5 in / 13 cm of space above and around
all sides of the appliance to allow for sufficient air flow.
Vortex Plus 4QT Stainless Steel_R6.indd 6Vortex Plus 4QT Stainless Steel_R6.indd 6 2021-06-25 3:49:39 PM2021-06-25 3:49:39 PM
To Next Page
Loading...
Need help?
General
