EasyManuals Logo

Instant ACE NOVA Safety, Maintenance & Warranty

Instant ACE NOVA
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
6
Register your product today at instantappliances.com/support/register
Troubleshooting
Problem Possible Reason Solution
Contents stop
blending while
the blender is still
powered on
Contents are too thick
Add liquid to recipe
Use the food tamper to agitate contents
• Use Pulse/Clean program
Smoky smell
First use – heating of
non-toxic element coating
No action needed, this is normal and harmless
Motor overheating, may
have run for too long
Press Cancel and wait a few minutes for motor to
cool
Motor overheating,
contents may be too thick
• Add thin liquid to pitcher
• Use the tamper to ease blending of thicker food
Blender will
not power on
Pitcher is not on base Place pitcher correctly on base
Power cord not fully
inserted into outlet
• Ensure power cord is plugged fully into a
120V outlet
• Check blender on a different outlet
Fuse has blown Contact Customer Care
Results are
too watery
Too much liquid Reduce liquid in recipe
Food is over-processed Use Pulse/Clean to prevent over-blending
Rainbow or blueish
discoloration of the
stainless steel in
the bottom of the
pitcher
Mineral deposits have settled
on the bottom of the pitcher
Throughly clean the pitcher as described in
the Care & Cleaning section. For deep cleaning
instructions, refer to the full manual online
at instantappliances.com
Error
Indicator
blinks
and
error
code
appears
on
display
E01
Motor overheated, may
have run for too long
Remove pitcher from base and wait a few minutes
for motor to cool
Contents may be too thick
• Remove and re-seat pitcher
• Add thin liquid to pitcher
• Use the tamper to ease blending of thicker foods
E02 Thermostat sensor error
• Remove and re-seat pitcher
• Contact Customer Care
• Allow the blender to rest for 5 minutes between
blending hot items and blending cold items
E03 Dry heat in pitcher
• Remove and re-seat pitcher
• Add liquid when using a hot blending program
E07 Motor is too hot
Unplug and allow the blender to cool before using
again
Any other servicing should be performed by an authorized service representative.

Other manuals for Instant ACE NOVA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Instant ACE NOVA and is the answer not in the manual?

Instant ACE NOVA Specifications

General IconGeneral
CategoryBlender
Power1000W
Voltage120V
Frequency60Hz
Capacity1.6 liters
ProgramsSmoothie, Puree, Frozen Dessert, Soup, Nut Milk, Oat Milk, Rice Milk, Soy Milk, Almond Milk, Crush Ice, Clean

Related product manuals