To Next PageTo Next PageWhat to do if my Instant ACE NOVA will not power on?
If your Instant Blender won't turn on, first ensure the pitcher is correctly placed on the base. Then, check that the power cord is fully plugged into a working 120V outlet. Try a different outlet to rule out electrical issues. If these steps don't work, contact Customer Care, as the fuse may have blown.
Why did my Instant ACE NOVA stop blending mid-cycle?
If the contents stop blending in your Instant Blender while it's still powered on, it's likely because the contents are too thick. To resolve this, try adding liquid to the recipe, using the food tamper to agitate the contents, or using the Pulse/Clean program.
How to fix watery results with my Instant ACE NOVA?
If your Instant Blender results are too watery, it's likely due to too much liquid in the recipe. Try reducing the amount of liquid. It could also be that the food is over-processed; using the Pulse/Clean function can help prevent this.
Why does my Instant Blender stop blending mid-cycle?
If your Instant Blender stops blending while still powered on, it could be due to several reasons. The contents might be too thick; in this case, add liquid to thin the recipe, being careful not to exceed the 56 oz / 1600 ml mark on the pitcher. Using the tamper can also help agitate the contents. Alternatively, using the Pulse function can help break up chunks. It's also possible that the motor is overheating, especially if it has been running for too long or if the contents are too thick. Press Cancel and allow a few minutes for the motor to cool down.
What to do if an error code appears on my Instant ACE NOVA Blender?
If an error code appears on the display of your Instant Blender, several factors could be the cause. The motor might have overheated from running for too long; in this case, remove the pitcher from the blender base and allow the motor to cool for a few minutes. Alternatively, the contents might be too thick. Remove and re-seat the pitcher on the blender base and add a thin liquid to the pitcher. Using the tamper can also ease blending of thicker foods. It is also possible that the motor is too hot. Unplug the blender and allow it to cool before using again.
Why does my Instant ACE NOVA Blender have a smoky smell?
A smoky smell from your Instant Blender can have several causes. If it's the first time you're using it, it's likely due to the heating of a non-toxic element coating, which is normal and harmless. However, it could also mean the motor is overheating, possibly from running for too long or the contents being too thick. If overheating is the cause, press Cancel and wait a few minutes for the motor to cool. If the contents are too thick, add a thin liquid to the pitcher or use the tamper to help blend the food.
Why is there discoloration in my Instant Blender pitcher?
The rainbow or bluish discoloration on the stainless steel at the bottom of your Instant Blender pitcher is due to mineral deposits. To remove this, thoroughly clean the pitcher as described in the Care & Cleaning section. For deep cleaning instructions, refer to the full manual online at instantappliances.com.
Why does my Instant ACE NOVA smell smoky?
If your Instant Blender is emitting a smoky smell, it could be due to a few reasons. If it's the first time you're using the blender, this might be due to the heating of a non-toxic element coating, which is normal and harmless. However, it could also indicate the motor is overheating, possibly from running for too long or processing contents that are too thick. In such cases, press Cancel and wait a few minutes for the motor to cool. Also, adding liquid to thin the recipe, while staying below the 56 oz / 1600 ml mark, and using the tamper can help.
How to prevent my Instant Blender results from being too watery?
General| Category | Blender |
|---|---|
| Power | 1000W |
| Voltage | 120V |
| Frequency | 60Hz |
| Capacity | 1.6 liters |
| Programs | Smoothie, Puree, Frozen Dessert, Soup, Nut Milk, Oat Milk, Rice Milk, Soy Milk, Almond Milk, Crush Ice, Clean |
Lists and describes the available cold and hot blending smart programs and their settings.
How to use the manual blending function for continuous blending up to 5 minutes.
Instructions for adjustable 10-speed pulse motion blending for quick food processing.
Details on using smart programs for cold blending like smoothies and crushed ice.
Information on hot blending programs for soups, purées, and other hot food preparation.
