Instant COLD BREWER - Before You Brew

6
User Manual
BEFORE YOU BREW
Initial setup
1. Remove the Instant
™
Cold Brewer from the box.
2. Discard excess packaging materials around and within the unit.
3. Ensure the brew basket’s bottom cap is securely fastened to
the basket.
You can unscrew the bottom cap to dispose of grounds and prior to cleaning.
4. Remove the jug lid.
5. Place brew basket through the handle housing, into the
glass jug.
6. Place the Instant™ Cold Brewer power base on a dry, stable surface.
7. Place glass jug with brew basket onto power base.
Clean before use
The glass jug and handle, lid and brew basket are all dishwasher safe.
You can also handwash these pieces using soap and rinsing with warm
water.
1. Remove lid from glass jug.
2. Use the brew basket handle to lift the brew basket from glass jug.
3. Unscrew the bottom cap of the brew basket.
4. Wash the pieces by hand or placing them onto the top rack of
a dishwasher.
5. Ensure all pieces are sufficiently dried prior to reassembly
and brewing.
6. While unplugged, use a damp cloth to wipe down the power base
and control panel.
DO NOT place power base into dishwasher or submerge power base
in water.