8
User Manual
Plugging in your Instant™ Frother Station
Once you’ve followed the initial setup and washing instructions, plug
the frother base power cord into an outlet.
• The control panel buttons will light up then enter Ready mode.
Default settings for Foam and Temperature levels will light up.
• After 5 minutes of inactivity, the frother enters Standby mode. The
control panel will dim.
• To re-enter Ready mode, press any button or place/remove the
frothing jug on/from the frother base.
Sound settings
Turn sound off
1. Press and hold and buttons together for 3 seconds.
2. Both and
indicator lights blink once. Sound is turned off and
the frother returns to Ready mode.
Turn sound on
1. Press and hold and buttons together for 3 seconds.
2. Both and indicator lights blink twice. Sound is turned on and
the frother returns to Ready mode.
To Next Page
Loading...
