Instant MILK FROTHER User Manual

instantappliances.com | 11
Set up the Milk Frother for use
01 Remove the lid from
the pitcher.
02 Position the square end of
the frothing paddle over
the shaft at the bottom of
the pitcher.
Rotate the frothing paddle
until it aligns with the shaft,
then push the frothing
paddle down until it
is secure.
03 For cold foam, warm foam,
or warm, thick foam, ll the
pitcher to between the
and lines.
To warm without creating
foam, ll the pitcher to
between the and
lines.
Overlling may cause
the milk frother to
overow when using a
foaming setting. Do not
overll the pitcher.
04 Place the lid on the
pitcher and press down
until it is secure.
05 Place the pitcher on the base.
06 Connect the power cord
to a 120 V outlet.
Making drinks
WARNING
DO NOT remove the lid while the frothing paddle is in operation to avoid risk of
electric shock, personal injury and/or property damage.
NOTICE
Do not attempt to froth if the liquid level is below the MIN ll line as indicated on the
inside of the pitcher.

Instant MILK FROTHER Specifications

General

Brand	Instant
Model	MILK FROTHER
Category	Kitchen Appliances
Language	English