instantappliances.com | 11
Before making your rst piping hot cup, you must clean the coffee maker.
To do so, run the following programs without a pod in place.
Initial cleaning
01 Lift the water tank upwards
to remove it from the back
of the coffee maker.
02 Clean the water tank with
warm water and dish soap,
then rinse it well with
clean water.
03 Fill the water tank with cool,
clean water to the MAX ll line
as indicated on the water tank.
04 Align the water tank with the
back of the coffee maker, then
press down to secure it.
Instant Tip You can leave the
water tank on the coffee maker
and ll it with a cup or pitcher,
or remove it to ll from your
faucet or fridge — your choice!
05 Plug the power cord into
a 120 V power source.
06 Use the handle to close
the top cover.
07 Place a mug beneath the
brew spout on the drip tray
plate — make sure the mug
is large enough to hold
8 oz / 237 mL of water.
To Next Page
Loading...
Need help?
General
