Instanta CPF210 - Seven-Day Timer

Filter Age
The age of the lter (in months), can be checked
at any time. With boiler turned o, press & hold
both the ON/OFF and ECO buttons together
until screen shows “FAGE” and the number of
months elapsed (e.g. 3 = 3 months old).
Filter-Life Monitor
The lter-life monitor can also provide an
accurate reading of how many litres remain
before the lter-cartridge expires. With boiler
turned o, press & hold ON/OFF button until
screen shows “0000 LITRES”.
7-Day Timer
The boiler can be set-up to switch ON and OFF
using the programmable seven-day timer.
Enable 7-Day Timer:
• With machine switched o, press & hold
ON/OFF button (for approximately
7 seconds) until Yellow screen shows
“USER PROG”, then release button.
• Advance through options until “TMDE” is
displayed (press & hold ON/OFF button to
select).
• There are three options to choose:
ALL – set ON and OFF times once and they
apply to the full 7 day week.
ON – set the ON and OFF times separately
for each day of the week.
OFF (Default) – the timer is disabled.
• Press ECO button to save the required
option.
Set-up 7-Day Timer:
• Advance to next menu option “TMRS”.
Again press & hold ON/OFF button
(long push) to select.
• Set the ON and OFF times; use ECO button
to advance the clock in 15 minute steps.
• Use the ON/OFF button to save the ON
and OFF set-times, and also to cycle
through the days of the week (All, Sun,
Mon, Tue etc.)
• To exit USER menu, press & hold ECO
button for 5 seconds then release
(screen will show “WAIT” whilst the
changes are being saved).
Overriding the Timer:
The timer can be overridden when in the
“timed-o” period, simply by pressing the
ON/OFF button on the front of the boiler. If the
timer is overridden, the boiler will remain ON
until the next programmed “time-o” period
occurs, or until the boiler is switched o
manually.
8