InStep Robin - Trailer Attachment Guide

4 Trailer Aachment
Use of the trailer without the safety strap aached to the
bicycle may result in serious injury or death. Always aach the
safety strap to the bicycle when using the trailer.
The following secon provides instrucons for aaching the trailer
to a bicycle with rear hub nuts or quick release.
Note: Remove the coupler plate and tab washer from the end of
the tow bar before proceeding.
❷ Place the tab washer on the axle. Fit the tab into the slot on
the bicycle frame dropout. Note: If your bicycle frame doesn’t
have a slot in the drop out, rotate the tab to t into the
axle slot. Figure 4.2
❶ Using a wrench, remove the hub nut and washer from the
bicycle’s back wheel. Figure 4.1
Washer
Hub nut
WARNING!
Slot
Tab
Axle slot
Tab washer
Figure 4.1
Figure 4.2
InStep Robin Trailer 12