InStep Sync - Attach the Canopy

ATTACH THE CANOPY
❶ Place the canopy over the canopy frame Figure 3.5
❷ Fasten the three snaps on the front, back and top of the
canopy to the side walls (six snaps total).
❸ Aach the hook and loop fasteners to the canopy to the strips
on the front and back of the frame walls.
❹ Roll the weather shield up into the bands at the top of the
canopy if you are not using
7 InStep Sync Trailer
Figure 3.5
1
2
2
2
3
3
4