InStep Take 2 User Manual

WARNING!
AT TACH THE WHEELS
❶ Insert the axle of the wheel into the rear wheel bracket hole.
Interlock the gear on the wheel with the gear on the rear
brake. Figure 3.8
❷ Push the wheel into the bracket until you hear the axle click
into place.
Note: shown from
underside of the frame.
❸ Pull rmly on the wheel to ensure the locking mechanism is
engaged. Repeat these steps on the opposite side. Figure 3.9
9 Take 2 Trailer
Wheels that are not securely locked in place may fall o the
trailer and cause serious injury or death. Always check the
wheels are securely locked in place before use.
Figure 3.8 Figure 3.9
Click
1
2
3

InStep Take 2 Specifications

General

Brand	InStep
Model	Take 2
Category	Bicycle Accessories
Language	English