InStep Take 2 - Adjusting Shoulder Strap Height

ADJUSTING THE SHOULDER STRAPS
Figure 5.2
1 2
3 4
There are three slots on the back of the seat. These slots are used
to adjust the proper height of the shoulder straps to your child’s
height. To adjust the shoulder strap height:
❶ Starng from the back of the seat, pull the shoulder strap
anchor away form the seat.
❷ Insert the anchor through the slit in the seat, pushing it
towards the front.
❸ Insert the anchor through the slit in the front of the seat at the
desired height.
❹ Pull the strap and anchor all the way through to the back.
Make sure the strap is properly anchored on the seat back.
Repeat these steps for the opposite strap. Figure 5.2
Take 2 Trailer 18