INSYS MoRoS GPRS 2.1 PRO User Manual

Functions MoRoS GPRS 2.1 PRO
12.9.5 Configuring Port Mirroring
With port mirroring, you can copy the data traffic of a switch port to a definable,
other switch port, called the sniffer port. This enables you to read the network traffic
for analysis purposes. The transmitting and receiving packets (TX/RX) of certain
ports can be mirrored separately to a sniffer port, where the network traffic can be
read.
Configuration with the web interface
To use a port as sniffer port, select the according port in the menu
"Switch" on the page "Port mirroring" in the drop-down list "Sniffer port".
Select in the drop-down list "TX mirroring to sniffer port" the port, whose
TX line data you want to copy to the sniffer port.
Select in the drop-down list "RX mirroring to sniffer port" the port, whose
RX line data you want to copy to the sniffer port.
Save your settings by clicking "OK".
90

INSYS MoRoS GPRS 2.1 PRO Specifications

General

Brand	INSYS
Model	MoRoS GPRS 2.1 PRO
Category	Network Router
Language	English