Intamsys FUNMAT HT Quick Start Guide

QUICK START GUIDE PN：320-0205 REV: P02
1 / 8
FUNMAT HT QUICK START GUIDE
Remove The Packaging
Unpack the printer and accessories trays from the cardboard box, and then take out the printer
and accessories trays. Gently place the printer on a flat, solid and sturdy platform.
STEP 1: Connect the power cable and
power on your printer.
STEP 2: Lower down the build plate by
clicking “Settings” → “Other
Settings”→ “Buildplate to the bottom.”
Reminder: Please keep all packaging materials for warranty purpose.

Intamsys FUNMAT HT Specifications

General

Build Volume	260 x 260 x 260 mm
Max Extruder Temperature	500 °C
Max Bed Temperature	160°C
Chamber Temperature	90°C
Layer Resolution	50 - 300 microns
Filament Diameter	1.75 mm
Connectivity	USB, Ethernet
Weight	65 kg
Supported Materials	PC, ABS, Nylon, PEEK, PEI
Nozzle Diameter	0.4 mm
Power Requirements	50/60Hz
Nozzle Temperature	Up to 500°C