EN – ENGLISH
10
If the display shows >10 mm, it means the
bottom of the device is >10 mm away from
the valve but it can provide valve location If
the device is not providing indication after
multiple attempts, take fluoroscopy or x-ray.
Additional Locator Icons
If the display shows
low baery reminder
icon, the system has
less than 4 minutes
of power remaining
before baeries need
to be replaced. Replace
the baeries using
the screwdriver stored
inside of the zipped
packet of the tool kit.
Baeries and a screwdriver are
stored in the case pocket.
Case pocket
If the display shows
baery alert icon,
the baeries must be
replaced using the
screwdriver stored
inside of the zipped
pocket of the tool kit.
Baeries can be replaced by
using the screw placed under the
purple buon.
Only replace with 123A baeries.
If the display shows system error icon, contact your local
sales representative.
When le idle for a prolonged period, the system will show
an auto shutdown alert and countdown timer. The system
will automatically shut down unless the front buon is
pressed before the timer counts down to :00 seconds.