Integra DBS-30.3 - 6. BEFORE YOU START; 6.1 Finding TV Viewing Channel;Source

EN
24
6. BEFORE YOU START
6.1 Finding the Viewing Channel /
Source on Your TV
After you have completed all the connections, you must
find the viewing channel (external input source) on your
TV.
1. After you have made all the necessary connections,
press [. (on/standby)] to turn on the unit.
2. Turn on your TV.
3. Press the button on the TV’s remote control that
accesses the external input channel. It may be labeled
“SOURCE”, “AV”, ”AUX” or “SELECT” (refer to your
TV’s user manual).
This is the correct viewing channel (external input
source).
• If the TV is connected by an HDMI cable, it may
take a while for the opening picture to come up.
• If a certain amount of time has passed since you
turned on the unit, welcome screen appears for the
first time you turn on the unit.
E5WF1UDENBook.indb24E5WF1UDENBook.indb24 2011/07/0415:21:222011/07/0415:21:22