Integra DBS-30.3 - 12. SETUPS (Continued); 12.6 Initialize

EN
48
12.6 Initialize
[Home ] Ȼ “Settings” Ȼ “Others” Ȼ “Initialize”
Menus to reset player settings, format USB flash drive,
local storage and clear network settings.
1. Use [Î / ï / Í / Æ] to select “Settings” in the home
menu, then press [Enter].
2. Use [Î / ï] to select “Others”, then press [Enter].
3. Use [Î / ï] to select “Initialize”, then press [Enter].
4. Use [Î / ï] to select the desired setting, then press
[Enter].
“Reset Settings”:
All the settings except for the parental lock and
network settings will be reset to default.
“Reset Network Settings”:
Resets the network setting to the default.
“(Unit) Erase Saved BD-ROM Data”:
Clears the data saved for the BD-ROM contents, such as
BD-ROM game scores, on this player.
“(USB) Erase Saved BD-ROM Data” (Available
only when a USB flash drive is connected.):
Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the USB flash
drive.
“Format USB” (Available only when a USB
flash drive is connected):
Initialize the USB flash drive.
5. Use [Í / Æ] to select “Yes”, then press [Enter].
6. Confirmation message will appear. Press [Enter] to
complete the setting.
7. Press [Home
] to exit.
C Caution
• Do not remove the USB flash drive
while executing the “Format USB” or
“(USB) Erase Saved BD-ROM Data”. It will damage the
drive.
D Note
• “Format USB” or “(USB) Erase Saved BD-ROM Data”
is not available when a Blu-ray Disc™ is in the unit.
E5WF1UDENBook.indb48E5WF1UDENBook.indb48 2011/07/0415:21:322011/07/0415:21:32