Integra DHC-60.7 - Page 87

Operating Other Components with the Remote Controller
En-55
Setting Item Default Value Setting Details
BD/DVD Zone2 Set the 12V trigger output setting to each
input.
"Off": No output
"Main": Output when "BD/DVD" is selected as
input for main room.
"Zone2": Output when "BD/DVD" is selected
as input for ZONE2.
"Main/Zone2": Output when "BD/DVD" is
selected as input for main room or ZONE2.
"Zone3": Output when "BD/DVD" is selected
as input for ZONE3.
"Main/Zone3": Output when "BD/DVD" is
selected as input for main room or ZONE3.
"Zone2/Zone3": Output when "BD/DVD" is
selected as input for ZONE2 or ZONE3.
"Main/Zone2/Zone3": Output when "BD/DVD"
is selected as input for main room, ZONE2 or
ZONE3.
CBL/SAT Zone2 Set the 12V trigger output setting to each
input.
"Off": No output
"Main": Output when "CBL/SAT" is selected
as input for main room.
"Zone2": Output when "CBL/SAT" is selected
as input for ZONE2.
"Main/Zone2": Output when "CBL/SAT" is
selected as input for main room or ZONE2.
"Zone3": Output when "CBL/SAT" is selected
as input for ZONE3.
"Main/Zone3": Output when "CBL/SAT" is
selected as input for main room or ZONE3.
"Zone2/Zone3": Output when "CBL/SAT" is
selected as input for ZONE2 or ZONE3.
"Main/Zone2/Zone3": Output when "CBL/SAT"
is selected as input for main room, ZONE2 or
ZONE3.
Setting Item Default Value Setting Details
STRM BOX Zone2 Set the 12V trigger output setting to each
input.
"Off": No output
"Main": Output when "STRM BOX" is selected
as input for main room.
"Zone2": Output when "STRM BOX" is
selected as input for ZONE2.
"Main/Zone2": Output when "STRM BOX" is
selected as input for main room or ZONE2.
"Zone3": Output when "STRM BOX" is
selected as input for ZONE3.
"Main/Zone3": Output when "STRM BOX" is
selected as input for main room or ZONE3.
"Zone2/Zone3": Output when "STRM BOX" is
selected as input for ZONE2 or ZONE3.
"Main/Zone2/Zone3": Output when "STRM
BOX" is selected as input for main room,
ZONE2 or ZONE3.
PC Zone2 Set the 12V trigger output setting to each
input.
"Off": No output
"Main": Output when "PC" is selected as input
for main room.
"Zone2": Output when "PC" is selected as
input for ZONE2.
"Main/Zone2": Output when "PC" is selected
as input for main room or ZONE2.
"Zone3": Output when "PC" is selected as
input for ZONE3.
"Main/Zone3": Output when "PC" is selected
as input for main room or ZONE3.
"Zone2/Zone3": Output when "PC" is selected
as input for ZONE2 or ZONE3.
"Main/Zone2/Zone3": Output when "PC" is
selected as input for main room, ZONE2 or
ZONE3.