Advanced Settings
55
Initial Setup
You can make the initial setup from the setup menu.
r
Wait for a while if "Initial Setup" cannot be selected. It will appear when the network
function is started up.
8.Remote Controller Setup
Setting Item Default Value Setting Details
Remote ID 1 Select an ID for the unit's remote controller from
"1", "2", and "3" to prevent interference between
the unit and other Integra/Onkyo components
that are installed in the same room. After
changing the ID on the main unit, change the
ID on the remote controller accordingly with the
following procedure.
1. While holding down Receiver, press
button the remote indicator lights.
2. With the number buttons, press one of 1, 2,
and 3. Receiver button flashes twice.
Remote Mode Setup – Input and register the remote controller code of
other devices.
r
For registration of the remote control code,
refer to "Operating Other Components with
the Remote Controller".
9.Lock Setup
Setting Item Default Value Setting Details
Setup Unlocked The Setup menu will be locked to protect the
settings.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
To Next Page
Loading...
Need help?
General
