Integra DRX-2.1 User Manual

28
> Network Functions > Specifications > Advanced Setup > Listening Modes
Troubleshooting Supplementary Information, etc�|
> Basic Manual
Setting Item Default Value Setting Details
Delay 2 sec Set after how many seconds the 12V trigger output
will occur in response to the unit's operation. As
some devices cause a large current when they turn
on, delay the output if such devices are connected.
Select a value between "0 sec" to "3 sec".
BD/DVD Main/Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BD/DVD" is selected as
input
for main room.
"Zone 2": Output when "BD/DVD" is selected as
input
for ZONE2.
"Main/Zone 2": Output when "BD/DVD" is selected
as input for main room or ZONE2.
CBL/SAT Main/Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
CBL/SAT
" is selected as
input for
main room.
"Zone 2": Output when "
CBL/SAT
" is selected as
input for ZONE2.
"Main/Zone 2": Output when "
CBL/SAT
" is selected
as input for main room or ZONE2
.
GAME Main/Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
GAME
" is selected as input
for main room.
"Zone 2": Output when "
GAME
" is selected as input
for ZONE2.
"Main/Zone 2": Output when "
GAME
" is selected as
input for main room or ZONE2
.
Setting Item Default Value Setting Details
STRM BOX Main/Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
STRM BOX
" is selected as
input for main room.
"Zone 2": Output when "
STRM BOX
" is selected as
input for ZONE2.
"Main/Zone 2": Output when "
STRM BOX
" is
selected as input for main room or ZONE2
.
PC Main/Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
PC
" is selected as input for
main room.
"Zone 2": Output when "
PC
" is selected as input for
ZONE2.
"Main/Zone 2": Output when "
PC
" is selected as
input for main room or ZONE2
.
AUX Main/Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
AUX
" is selected as input for
main room
.
"Zone 2": Output when "
AUX
" is selected as input
for ZONE2.
"Main/Zone 2": Output when "
AUX
" is selected as
input for main room or ZONE2
.
CD Main/Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
CD
" is selected as input for
main room.
"Zone 2": Output when "
CD
" is selected as input for
ZONE2.
"Main/Zone 2": Output when "
CD
" is selected as
input for main room or ZONE2
.

Integra DRX-2.1 Specifications

General

Brand	Integra
Model	DRX-2.1
Category	Stereo Receiver
Language	English