Integra DRX-3.3 User Manual

43
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
 7.1 Channel System (Bi-Amping the Speakers)
12
5 4
87
3
6
For high-
frequency
For low-
frequency
You can congure a 7.1 Channel System ( p19) by connecting front speakers that support Bi-Amping connection.
The Bi-Amping connection can improve the quality of the low and high pitched ranges. Be sure to remove the jumper bar
connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction
manual of your speakers as well.
 "Speaker Setup" settings during
Initial Setup ( p163)
Speaker Setup
Select how many speakers you have.
Next
Speaker Channels
Subwoofer
Height 1 Speaker
Height 2 Speaker
Zone Speaker
Zone 2 Preout
Bi-Amp
Speaker Impedance
7.1 ch < >
Yes
---
---
No
Zone 2
Yes
6ohms or above
• Speaker Channels: 7.1 ch
• Subwoofer: Yes
• Height 1 Speaker: ---
• Height 2 Speaker: ---
• Zone Speaker: No
• Zone 2 Preout: Set any value
( p130)
• Bi-Amp: Yes
• Speaker Impedance: Set any
value ( p36)

Integra DRX-3.3 Specifications

General

Brand	Integra
Model	DRX-3.3
Category	Stereo Receiver
Language	English