72
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Playing Back on multiple devices (AirPlay2)
This unit supports AirPlay2. If the version of the iOS device is iOS11.4 or later,
you can play the music of the iOS device on this unit and other devices that
support AirPlay2.
1. Connect the iOS device to the access point where this unit is connected via
network.
2. Tap the AirPlay icon on the play screen of the music play application on the
iOS device, and select this unit and AirPlay2-supported devices to play from
the displayed devices.
• AirPlay2-supported devices are displayed with white circle on the right side.
• Multiple AirPlay2-supported devices can be selected.
• The volume can be adjusted on individual devices.
3. Play the music le on the iOS device.
• When "6. Hardware" - "Power Management" - "Network Standby" is set to
"O" in the Setup menu, turn this unit on manually, and press the NET button
on the remote controller. In the factory default setting, the Network Standby
function ( p143) is set to On.
• Due to the characteristics of AirPlay wireless technology, the sound produced
on this unit may slightly be behind the sound played on the AirPlay-enabled
device.
You can also play the music les on a PC with iTunes (Vere. 12.8 or later)
equipped. Conrm that this unit and the PC are connected to the same network
beforehand. Then, press NET on this unit. Next, click the AirPlay icon
in
iTunes, select this unit and AirPlay2-supported devices to play from the displayed
devices, and start play of a music le.
Integra DRX-3.3 XXXXXX
iPhone
Integra XXXXXXXX
Integra XXXXXXXX
e.g., iOS 11.4
To Next Page
Loading...
Need help?
General
