Integra RDA-7 - Important Safety Instructions

RDA-7
2
RDA-7
Supplied accessories
Check that the following accessories are supplied with the RDA-7.
Power cord × 1
The power cord may differ
depending on the region.
Power cord
Poly bag
Instruction Manual
Inner carton
Specifications
AMPLIFIER SECTION
Number of channels: 7
Power:
150 watts per channel min. RMS at 8 ohms, 2 channels
driven from 20 Hz to 20 kHz with no more than 0.1 % total
harmonic distortion.
300 watts per channel min. RMS at 4 ohms, 2 channels
driven at 1 kHz with no more than 0.1 % total harmonic
distortion.
Frequency response @ -3 dB: 3.5 Hz - 250 kHz
Input Impedance: 47 kohm each phase
Input signal for max output power:
1.2 V
Input Sensitivity (Unbalanced):
100 mVrms
Input Sensitivity (Balanced): 200 mV
THD: 0.03 %(20 Hz to 20 kHz)
Damping Factor: 40 at 8 ohm
Power consumption
USA, Canada and some Asian model:
15 A
Other models: 10 A
Rated Speaker Impedance: 4 ohms
GENERAL
Power Supply: AC 120 V, 60 Hz
AC 230 V, 50 Hz
AC 220 V, 50/60 Hz
Dimensions (W × H × D): 450 × 195 × 596 mm
17-11/16" × 7-11/16" × 23-7/16"
Weight: 51.0 kg, 112.4 lbs.
Specifications and features are subject to change without
notice.
Power supply and voltage vary depending on the area in
which the unit is purchased.