To Next PageTo Next Page
Need help?Do you have a question about the Integra DTA-9.4 and is the answer not in the manual?
General| Amplification Type | Class AB |
|---|---|
| HDMI Inputs | 7 |
| HDMI 2.1 | Yes |
| Phono Input | Yes (MM) |
| Network | Ethernet, Wi-Fi |
| THD+N (Total Harmonic Distortion + Noise) | 0.08% |
| THD | 0.08% |
| Input Sensitivity and Impedance | 200mV/47kΩ |
| Signal-to-Noise Ratio | 106dB |
| Speaker Impedance | 4 Ohms – 16 Ohms |
| HDR Support | Dolby Vision |
| eARC | Yes |
| Digital Audio Inputs | Optical: 2 |
| Zone 2 Audio Output | Yes |
| Zone 3 Audio Output | Yes |
| Pre-Outs | 11.2 ch |
| Speaker Outputs | 11 |
| Streaming Services | Spotify, Tidal, Deezer, TuneIn |
| Voice Control | Amazon Alexa, Google Assistant |
Essential safety guidelines and warnings for operating the amplifier to prevent damage or injury.
Additional important notes on usage, care, and compliance, including FCC and Canadian model specifics.
Explanation of the power switch, its functions, and how to turn the amplifier on and off.
Solutions for the amplifier not turning on, checking power cord and switch settings.
Troubleshooting steps for when the amplifier is on but no audio output is heard, checking connections and settings.
