EasyManua.ls Logo

Integra DTA-9.4 - Specifications

Integra DTA-9.4
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Specifications
Amplifier section
Continuous average power output
(FTC Power, Rated Power) (Measured with AES-17 LPF)
Front L/R: 120 Watts per channel min. RMS. Into
8 ohms 2 channel driven, from 20 to
20,000 Hz with no more than 1 % total
harmonic distortion.
240 Watts per channel min. RMS. Into
4 ohms 2 channel driven, 1,000 Hz
with no more than 1.5 % total
harmonic distortion.
Center: 120 Watts min. RMS. Into 8 ohms 1
channel driven, from 20 to 20,000 Hz
with no more than 1 % total harmonic
distortion.
240 Watts min. RMS. Into 4 ohms 1
channel driven, 1,000 Hz with no more
than 1.5 % total harmonic distortion.
Surround L/R: 120 Watts per channel min. RMS. Into
8 ohms 2 channel driven, from 20 to
20,000 Hz with no more than 1 % total
harmonic distortion.
240 Watts per channel min. RMS. Into
4 ohms 2 channel driven, 1,000 Hz
with no more than 1.5 % total
harmonic distortion.
Surround Back: 120 Watts per channel min. RMS. Into
8 ohms 2 channel driven, from 20 to
20,000 Hz with no more than 1 % total
harmonic distortion.
240 Watts per channel min. RMS. Into
4 ohms 2 channel driven, 1,000 Hz
with no more than 1.5 % total
harmonic distortion.
Dynamic Power Output 2 × 350 Watts at 2 ohms
2 × 267 Watts at 4 ohms
2 × 162 Watts at 8 ohms
Total Harmonic Distortion
(Measured with AES-17 LPF) 1 % at rated power (1 kHz)
0.01 % at 1 watt output (1 kHz)
Damping Factor 25 at 8 ohms 1 kHz
Input Sensitivity and Impedance 1 V, 5 k ohms (Unbalanced)
2 V, 10 k ohms (Balanced)
5 - 12V dc (12V Trigger)
Frequency Response 10 Hz to 60 kHz : +1 dB, –3 dB (8 ohms)
Signal to Noise Ratio 115 dB (IHF-A, 1 V input / Unbalanced
or 2 V input / Balanced)
General
Power Supply AC 120 V, 60 Hz
Power Consumption 5.3 A
Power Consumption
in standby mode 3.8 W
Input terminals
Analog Audio: Unbalanced (RCA type) × 7
Balanced (XLR type) × 7
Control: 12V TRIGGER (CONTROL LINK) × 1
Power supply: AC INLET (IEC type) × 1
Output terminals
Analog Audio: Speakers × 7
Dimensions (W × H × D) 17-1/8" × 6-7/8" × 17-13/16"
Weight 39.0 lbs.
Specifications and features are subject to change without notice.

Other manuals for Integra DTA-9.4

Related product manuals