Intek MT-2020 User Manual

Model No: INTEK
M
M
T
T
-
-
2
2
0
0
2
2
0
0
/
/
4
4
0
0
4
4
0
0
PMR 8 Channel – LPD 69Channel
Service Manual
Created by: Approved by: Rev. No:
For Stage : Release Date : Page 1 of 49

Intek MT-2020 Specifications

General

Brand	Intek
Model	MT-2020
Category	Two-Way Radio
Language	English

Summary

SPECIFICATIONS

STANDARD TEST CONDITIONS

Standard operating parameters and environmental conditions for testing.

BLOCK DIAGRAM

MT-2020D SCHEMATIC DIAGRAM

MT-4040D SCHEMATIC DIAGRAM

TEST AND ALIGNMENT PROCEDURE

VCO ADJUSTMENT

Steps to adjust the Voltage Controlled Oscillator for correct frequency output.

TRANSMITTER FREQUENCY ALIGNMENT

Procedure for aligning the transmitter's output frequency.

TRANSMITTER OUTPUT POWER CHECK

Steps to verify the transmitter's output power levels.

TRANSMITTER DEVIATION ADJUSTMENT

Procedure for adjusting the transmitter's frequency deviation.

RECEIVER ALIGNMENT

Steps to align the receiver for optimal performance.

MT-4040 SEMICONDUCTOR VOLTAGE CHART