Profile Connection Preferences
To access the profile connection preference option:
1. From the General page, click the Networks tab.
2. Click the Advanced button.
3. Under the Auto-connection heading, click the one of the following options:
● Connect to available networks using profiles only (Default setting): Use the
profiles in the Profile List to connect to any available network.
● Connect to any available network if no matching profile is found: Connect to
any available network without using a profile from the Profile List.
● Connect to any network based on profiles only (Cisco Mode): Connect to any
available network access point using profiles enabled for Cisco CCX (version 1)
mode. This mode allows connection to access points that support multiple and
blank network names (SSIDs).
4. Click OK to save the setting and return to the previous dialog.
Creating a New Profile
To add a new profile, use the Profile Wizard sequence of dialogs to configure the profile
contents. The following example uses all of the Profile Wizard dialogs, although some of
the settings may not be required.
To create a new profile and connect to a network:
1. From the General page, click the Networks tab.
2. Click the Add button. The General Settings dialog displays.
NOTE: If this is the first time you have created a profile, click the profile named
Default in the Profile List, click the Edit button and rename the default profile in
the Profile Name field on the General page.
General Settings
3. Enter a profile name in the Profile Name field.
To Next Page
Loading...
Need help?
General