Need help?Do you have a question about the Intel Celeron J3455 and is the answer not in the manual?
General| Processor Number | J3455 |
|---|---|
| Number of Cores | 4 |
| Number of Threads | 4 |
| Base Frequency | 1.50 GHz |
| Burst Frequency | 2.30 GHz |
| TDP | 10W |
| Lithography | 14 nm |
| Embedded Options Available | Yes |
| Max Memory Size | 8 GB |
| Max # of Memory Channels | 2 |
| Max Memory Bandwidth | 25.6 GB/s |
| ECC Memory Supported | No |
| Processor Graphics | Intel HD Graphics 500 |
| Graphics Base Frequency | 250 MHz |
| Graphics Burst Frequency | 750 MHz |
| Execution Units | 12 |
| Max Resolution (HDMI) | 4096x2160@30Hz |
| Max Resolution (DP) | 4096x2160@60Hz |
| DirectX Support | 12 |
| OpenGL Support | 4.4 |
| PCI Express Revision | 2.0 |
| Max # of PCI Express Lanes | 6 |
| USB Revision | 3.0 |
| Sockets Supported | FCBGA1296 |
| Max CPU Configuration | 1 |
| TJUNCTION | 105°C |
| Intel Virtualization Technology (VT-x) | Yes |
| Intel 64 | Yes |
| Instruction Set | 64-bit |
| Instruction Set Extensions | SSE4.2 |
| Intel AES New Instructions | Yes |
| Secure Key | Yes |
| Intel Software Guard Extensions (Intel SGX) | Yes |
| Idle States | Yes |
| Thermal Monitoring Technologies | Yes |
| 4K Support | Yes |
| Cache | 2 MB |
| Memory Types | DDR3L/LPDDR3 |
| PCI Express Configurations | 1x4, 2x2, 1x2+2x1 |
Defines essential terms like BSP, OS, RAM, and SoC for understanding the guide.
Lists and references essential documentation for the Yocto Project BSP, including release notes.
Details identified issues during the Yocto Project build process and provides solutions or workarounds.
Outlines the minimum hardware and software requirements necessary to prepare the build system.
Step-by-step instructions to configure the local system for building the Yocto Project image.
To Next Page