Intel Cyclone 10 GX FPGA - Page 51

Figure 16. The FMC Tab
The following sections describe controls in the FMC tab.
Status
Displays the following status information during a loopback test:
• PLL Lock: Shows the PLL locked or unlocked state.
• Pattern Sync: Shows the pattern synced or not synced state. The pattern is
considered synced when the start of he data data sequence is detected.
• Details: Shows the PLL lock, pattern sync status and number of errors per
channel.
5 Board Test System
UG-20105 | 2017.12.18
Intel
®
Cyclone
®
10 GX FPGA Development Kit User Guide
51