Intel D845EPI

Using the BIOS Setup Program
61
Table 19. Primary/Secondary IDE Master/Slave Submenus (continued)
Feature Options Description
PIO Mode
(Note)
• Auto (default)
• 0
• 1
• 2
• 3
• 4
Specifies the PIO mode.
Ultra DMA • Disabled (default)
• Mode 0
• Mode 1
• Mode 2
• Mode 3
• Mode 4
• Mode 5
Specifies the Ultra DMA mode for the drive.
Cable Detected
(Note)
None Displays the type of cable connected to the IDE
interface: 40-conductor or 80-conductor (for
ATA-66/100 devices).
Note: These configuration options appear only if an IDE device is installed.continued