To Next Page

To Previous Page

Using the BIOS Setup Program

ATAPI CD-ROM Drives

Main Advanced Security Power Boot Exit

1st Drive [xxxxxxx]

Drive [xxxxxxx]

Specifies the boot

sequence from the

available devices.

Select the boot device

with UpArrow or

DownArrow key. Press

Enter to set the

selections as the

intended boot device.

ARMD = ATAPI Removable

Media Device.

m o

Select Screen

n p

Select Item

Enter

Select ` Sub-Menu

F1 General Help

P9 Setup Defaults

F10 Save and Exit

ESC Exit

The submenu shown in Table 32 is for setting ATAPI CD-ROM drives.

Table 32. ATAPI CD-ROM Drives Submenu

Feature Options Description

ATAPI CD-ROM Drive

(Note)

Dependent on installed

ATAPI CD-ROM drives

Specifies the boot sequence from the available

ATAPI CD-ROM drives. To specify boot sequence:

1. Select the boot device with <↑> or <↓>.

2. Press <Enter> to set the selection as the

intended boot device.

Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display up to

four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives supported by the BIOS.

Intel D845EPI Product Guide

Other manuals for Intel D845EPI