Intel MFSYS25V2 - User Manual

Other manuals for Intel MFSYS25V2

Questions and Answers

K
Kimberly RodriguezAug 20, 2025
What to do if I cannot connect to management module on my Intel MFSYS25V2?
- M
  Melissa TaylorAug 20, 2025
  If you're unable to connect to the management module on your Intel Server, start by checking if the power LED is lit. If it's not, and it's the only module with an unlit LED, try reseating it or replacing it with another module. If other modules also have unlit LEDs, ensure the chassis power supply modules are correctly installed and connected to grounded AC outlets. If the fault LED is lit, attempt to reseat the module or replace it. Also, verify the Ethernet management port is connected to the network and that the cable is functional; try replacing it if necessary. Finally, check if the management module is correctly configured for the network it's connected to; you might need to reset it using the reset button.
M
Martin HudsonAug 30, 2025
What to do if the chassis fan module is not functioning on my Intel Server?
- M
  Mr. Roberto JenningsAug 30, 2025
  If a single fan is not working, check the power and fault LEDs. If the power LED is off, reseat the fan module; if it's on, check the fault LED. If both fan modules are not working, verify that the power supply modules are properly installed and connected to grounded AC outlets on your Intel Server.
T
Tina HaydenNov 10, 2025
What to do if I cannot connect to a compute module on my Intel Server?
- T
  Theresa MeadowsNov 10, 2025
  To address connectivity issues with a compute module on your Intel Server, begin by ensuring all jumpers are in their default positions: CMOS Clear J1F2 should be on pins 1-2, and BMC Force Update J7A1 on pins 2-3. Verify the compute module is powered on and functioning normally, and that an operating system is installed, operating correctly, and properly configured for the network. Confirm that both the compute module and client are connected to the correct physical LAN and VLAN. Check the Ethernet switch module: if its power LED isn't lit, try reseating it; if the power fault LED is lit, use the Intel Modular Server Control to check the system status; if not, check the switch port link. Ensure the switch is connected to the network via an Ethernet cable and that the link light for the co...

Intel MFSYS25V2 Specifications

General

Number of Storage Modules Supported	Up to 2
Product Name	Intel Modular Server System MFSYS25V2
Memory Type	DDR3
Networking	Integrated Gigabit Ethernet
Remote Management	Intel® Modular Server Control
Management	Intel Modular Server Control