To Next Page
K
Kimberly RodriguezAug 20, 2025
What to do if I cannot connect to management module on my Intel MFSYS25V2?
- MMelissa TaylorAug 20, 2025
If you're unable to connect to the management module on your Intel Server, start by checking if the power LED is lit. If it's not, and it's the only module with an unlit LED, try reseating it or replacing it with another module. If other modules also have unlit LEDs, ensure the chassis power supply modules are correctly installed and connected to grounded AC outlets. If the fault LED is lit, attempt to reseat the module or replace it. Also, verify the Ethernet management port is connected to the network and that the cable is functional; try replacing it if necessary. Finally, check if the management module is correctly configured for the network it's connected to; you might need to reset it using the reset button.
General
