To Next PageTo Next Page
Need help?Do you have a question about the Intel M50CYP1UR Series and is the answer not in the manual?
General| Product Name | Intel Server System M50CYP1UR |
|---|---|
| Product Type | Server |
| Form Factor | 1U |
| CPU Socket | LGA 4189 |
| Number of Memory Slots | 16 |
| Maximum Memory Supported | 4 TB |
| Category | Rack Server |
| Processor Support | Intel Xeon Scalable Processors |
| Memory Type | DDR4 |
| Drive Bays | 10 x 2.5" hot-swap drive bays |
| PCIe Slots | 3 x PCIe 4.0 slots |
| Expansion Slots | 3 |
| Network Controller | Intel Ethernet Controller |
| Power Supply | Redundant Power Supplies |
| Power Supply Wattage | 1600W |
| Management | IPMI |
| Storage Bays | 10 x 2.5" hot-swap drive bays |
Lists supporting documents and their classifications for the M50CYP family.
Identifies key components of the server chassis for integration.
Provides instructions for removing and installing the system's top cover panels.
Details the assembly and installation of the processor heat sink module and processor.
Guides on how to install DDR4 DIMMs and Intel® Optane™ PMem modules.
Instructions for installing power supply modules into the server bays.
Procedures for removing and installing the system's top cover panels.
Instructions for installing and removing riser card assemblies and add-in cards.
Guides for assembling, installing, and removing 2.5-inch SSD drives.
Procedures for installing and removing OCP* 3.0 Ethernet network adapters.
Instructions for installing and removing M.2 NVMe* or SATA SSD drives.
Step-by-step guide for installing a Trusted Platform Module (TPM).
Instructions for installing and removing the Intel® VROC 7.5 key.
Procedures for installing and removing SAS interposer cards and RAID modules.
Guide for installing and removing the RMFBU and its mounting bracket.
Overview of available front drive bay configurations for the server.
Identifies features on the back panel, front control panel, and front I/O.
Explains the identification and status of drive bay LEDs.
Provides an overview of the server board's features and component locations.
Details the location and function of system configuration and recovery jumpers.
Instructions for removing and installing the system's top cover panels for service.
Procedures for replacing individual system fans, which are hot-swappable.
Step-by-step guide for replacing memory modules (DIMMs).
Instructions for replacing power supply modules, noting hot-swap capabilities.
Detailed steps for removing and installing processors and their heat sink modules.
Guides for removing, assembling, and installing 2.5-inch SSD drives.
Instructions for replacing 4x2.5" and 12x2.5" backplanes.
Procedures for replacing the system's coin-cell battery.
Detailed steps for removing and installing the server board.
Rules for populating DDR4 DIMM slots for optimal performance and compatibility.
Guidelines for installing Intel® Optane™ Persistent Memory modules.
Lists POST error beep codes used to inform users of error conditions.
Summarizes mixed processor conditions and actions during initialization errors.
