Intel® Server System M50CYP1UR Family System Integration and Service Guide
58
Figure 59. Installing Latch on the Plastic Case
1. Insert the latch in the opening on the plastic case (see Letter A).
2. Lift the latch holder slightly up (see Letter B) and insert the notch into opening until it clicks (see Letter C).
3. Bring the latch down until it is aligned vertically (see Letter D).
•
Figure 60. Insert Super Cap
4. Insert the super cap capacitor inside the plastic case with the cable protruding out.
Choose the opening in the plastic case for the cable closest to the RAID module where the cable is going
to be connected.
To Next Page
Loading...
