Intel Nuc 11 Pro Kit User Manual

Skip to content
Manuals+
User Manuals Simplified.
Intel Nuc 11 Pro Kit User Guide
Home » Intel » Intel Nuc 11 Pro Kit User Guide
Intel Nuc 11 Pro Kit User Guide
Contents [ hide
1 Revision History
2 Introduction
3 Open the Chassis
4 Install and Remove System Memory
5 Install an M.2 SSD
6 Install a 2.5-inch SSD or Hard Drive
7 Close the Chassis
8 Use the VESA Bracket (Optional)
9 Connect Power
10 Install an Operating System
11 Install the Latest Device Drivers and
Software
12 File Downloads
13 References
14 Related Manuals
Revision History
Date Revision Description
January 2021 1.0 Initial Release.
Introduction
This User Guide provides step-by-step installation instructions for these products:
Intel® NUC 11 Pro Kit NUC11TNHi3
Intel® NUC 11 Pro Kit NUC11TNHi5
Intel® NUC 11 Pro Kit NUC11TNHv5
Intel® NUC 11 Pro Kit NUC11TNHi7
Intel® NUC 11 Pro Kit NUC11TNHv7
Intel® NUC 11 Pro Kit NUC11TNHi30L
Intel® NUC 11 Pro Kit NUC11TNHi50L

Intel Nuc 11 Pro Kit Specifications

General

Processor	11th Gen Intel Core i3, i5, or i7
Chipset	Intel SoC
Graphics	Intel Iris Xe Graphics
Maximum Memory	64 GB
Memory Type	DDR4-3200
Memory Slots	2 x SO-DIMM
Storage Interface	SATA 6Gb/s
Networking	Wi-Fi 6, Bluetooth 5.1
Front Ports	2 x USB 3.2 Gen 2 Type-A, 1 x USB 3.2 Gen 2 Type-C
Rear Ports	HDMI 2.0b
Audio	3.5mm audio jack
Operating System	Windows 10, Linux
Dimensions	117 x 112 x 54 mm (Tall Chassis)